GE Logiq P7 Service options:
Free technical support is available from KPI during installation and over the course of the standard limited warranty. Technical support is available after the warranty period at an hourly cost per issue.
GE Logiq P7 Maintenance:
KPI recommends the use of a surge protector along with a dedicated power outlet. Probes should be disinfected after every use with a disinfectant wipe proven not to damage the lens (KPI recommends SonoWipes for this.) One PM visit (preventative maintenance) every year.
GE Logiq P7 FAQ:
Dimensions and Weight
Height
Fixed Monitor Arm (Standard)
– Maximum: 1475 mm (60.0 in)
– Minimum: 1375 mm (54.1 in)
Articulating Monitor Arm (Option)
LOGIQ P7 Standard 1320mm – 1470 mm (52.0 in – 57.9 in)
LOGIQ P7 Tall 1420 mm – 1570mm (55.9 inch – 61.8 in)
Width
– Keyboard: 430 mm (16.9 in)
– Foot Cover: 495 mm (19.5 in)
– Monitor: 525 mm (20.7 in)
Depth
– Foot Cover: 685 mm (27.0 in)
– Rear Handle: 740 mm (29.1 in)
Weight (without peripherals)
– 60 kg/ 132 lbs
GE Logiq P7 Specifications:
Digital P-Agile Beamformer Architecture
386,469 System Processing Channels
Max. Frame Rate up to 2399 F/s
Displayed Imaging Depth: 0 – 33 cm
Minimum Depth of Field: 0 – 1 cm (Zoom, probe dependent)
Maximum Depth of Field: 0 – 33 cm (probe dependent)
270 dB of Composite Dynamic Range
Adjustable Dynamic Range
Adjustable Field Of View (FOV)
Up to 132 degree (depending on Probe)Image Reverse: Right/Left
GE Logiq P7 Electrical power:
Nominal input voltage: 100-240 VAC, frequency 50/60 Hz
Power consumption maximum: 400 VA with peripherals
Mohon maaf, form diskusi dinonaktifkan pada produk ini.