Laminar flow cabinet BAVnp-01-Laminar-S-1.2

Kategori: Laminar air flow | 6 Kali Dilihat
Laminar flow cabinet BAVnp-01-Laminar-S-1.2 Reviewed by on . This Is Article About Laminar flow cabinet BAVnp-01-Laminar-S-1.2

Standard Configuration Work Chamber hinged front sash made of tempered glass; opening, closing and upholding is carried out by gas springs; damper against front window closing impact; side windows made of tempered glass; slanted front surface of the cabinet; LED lighting of the work chamber; one set of electric sockets… Selengkapnya »

Rating: 1.0

Hubungi Kami

Order via SMS

6285292275599

Format SMS : ORDER#NAMA PRODUK#JUMLAH
Pemesanan Juga dapat melalui :
SKU :
Stok Tersedia
Kg
12-01-2020
Detail Produk "Laminar flow cabinet BAVnp-01-Laminar-S-1.2"

Standard Configuration

Work Chamber

  • hinged front sash made of tempered glass; opening, closing and upholding is carried out by gas springs;
  • damper against front window closing impact;
  • side windows made of tempered glass;
  • slanted front surface of the cabinet;
  • LED lighting of the work chamber;
  • one set of electric sockets in the work chamber (2 pcs. in the right part of the rear wall);
  • airflow laminarization screen made of polymer micromesh;
  • tabletop made of stainless steel (AISI 304);
  • work opening screen for operator protection during UV light operation.

UV light

  •  UV light is located is the upper part of the work chamber rear wall and is covered with a protective grille made of stainless steel;

Supply and Exhaust Air Filtration System

  • supply air coming into the work chamber is cleaned by preliminary filter G4 and supply HEPA filter H14;
  • two fans ensuring air supply into the cabinet.

Control System Components

  • microprocessor control system;
  • pushbutton control panel with LCD screen;
  • airflow sensors;
  • individual fuse for power supply to the main functions of the cabinet (fan, lighting, UV lamp);
  • individual fuse for electric sockets of the work chamber;
  • fixed power cord.

Testing Components

  • built-in outlet for sampling the air from the high-pressure plenum under the G4 filter for HEPA filter integrity testing.

Stand

  •  frame stand with footrest;
  •  caster wheels for cabinet relocation;
  •  screw supports for cabinet fixation at operating site.

MAIN CHARACTERISTICS

Installation work chamber air cleanliness class for suspended particle (aerosol) concentration as per ISO 14644-1

-for particles of 0.5µm and more

-for particles of 5.0µm and more

 ISO 5

ISO M (20; ≥5µm); LSAPC

Class of the installed in the cabinet НЕРА-filters according to EN 1822-1 H14
Prefilter according to EN 779 G4
Average downflow velocity in the work chamber:

– preset velocity, mps

– recommended velocity range for customized setting that guarantees uniformity (laminarity) of the airflow, mps

 

0.4

0.25-0.5

Illuminance level in the working zone, lux, not less than 1000
Noise level at 1m distance from the cabinet (at centerline of the work opening with the front window sash at working position), dB, not more than 55*

 MAIN PARAMETERS AND DIMENSIONS

Article 1Е-D.001-12.0
Dimensions of the assembled cabinet with the stand /WхDхH/, mm 1200х760х1870
Dimensions of the working chamber /WхDхH/, mm 1130х625х650
Mass of assembled cabinet with the stand, kg, not more than 160
Maximum input power of the cabinet, W, not more than (exclusively of the load on the built-in outlet unit) 410
Accepted load on the built-in outlet unit, W/А, not more than  1000
Clean air inflow capacity, m3/h ≈790**

* level of noise in free sound field over the sound-reflecting surface (noise level in real operating environment depends on the dimensions of the operating site as well as and on the total background noise and may vary by 3-4 dB(A))

** determined based on 0.4 mps preset downflow velocity.

 

 
Chat via Whatsapp