Electro Deionized EDI-UPT-10
Labocon Electro Deionized Series is a superior choice for production of Deionized and Ultrapure water for high grade experiments.
The deionized water is stable grade II pure water with resistivity>5 MΩ.cm (25 ℃), TOC<30ppb, and the lowest running cost. The ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. With LCD controlling system, 3 way water quality sensor, timing and quality dispensing, single stage RO system，2 pump and Ion pure EDI module.
The Deionized water quality completely meets the requirements of general chemical or biological experiments for pure water, and is up to the standard of ISO 3696(Type II), ASTM D1193 (Resistivity of type II and TOC), and the requirements for pure water of CLSI (NCCLS) clinical laboratory, GB/T6682, America, Europe & Japan’s pharmacopeia.
The Ultrapure water resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
TECHNICAL SPECIFICATIONS – ELECTRO DEIONIZED UPT SERIES
Output(25℃)* 10 litres/hour
Other models are available with 24 litres/hour (EDI-UPT-24- UVF) and 45 litres/hour (Model EDI-UPT-45-UVF).
Others specs will be remain same as per the brochure.
Pure water outlet 2:
Deionized Water water, ultrapure water Type I
Ultrapure water quality Resistivity 18.2MΩ.cm TOC* <10ppb <3ppb
DO water quality/ Type II
Ultrapure water quality Resistivity >5MΩ.cm TOC* <30ppb
Silicone rejection rate >99.9%
Feed water requirements Tap water, RO water, distilled water, deionized water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2
Electrical requirements AC110-240V, 50/60Hz Power 120W
Standard configuration Main body (Including 1 set of cartridge)
*The value will be influenced by temperature and feed water’s quality.